534 reviews analysed
1. DC97-14486A Dryer Heating Element for Samsung Dryer DC97-08891A AP4342351 W10222771 PS4220205 Fit DV45H7000EW/A2 DV48H7400EW/A2 DV45H7000EW
- ★ Replacement: DC97-14486A Samsung dryer heating element replacement replace for AP4342351, 1795935, W10222771, 1548087, AH2366820, EA2366820, PS2366820, AP4452178, DC97-08891A.
- ★ Works with the following Samsung models: DV203AES, DV203AEW, DV206AES, DV206LEW, DV209AEW, DV210AES, DV210AEW, DV218AEB, DV218AES, DV218AEW, DV219AEB, DV219AEW, DV220AEW, DV221AEG, DV221AES, DV229AEG, DV231AEW, DV2C6BEW, DV306BEW, DV306LEW, DV316BEC, DV316BEW, DV316HEC, DV316LES, DV316LEW, DV317AEG, DV317AES, DV317AEW, DV328AEG, DV328AER, DV328AEW, DV330AEB, DV330AEW, DV331AER, DV331AEW, DV337AEG, DV337AEL, DV337AER, DV337AEW, DV338AEB, DV338AEW, DV339AEG, DV339AEL, DV339AER, DV339AES.
- ★ Package include: This dryer heater assembly includes the heater element DC97-08891A, DC47-00018A housing, thermostats and DC96-00887A thermal fuse.
- ★ Durable to use: The DC97-14486A dryer heating element for Samsung is made of high quality metal material, durable to use and easy to install.
- ★ 100% Satisfied guarantee: We offer lifetime money back guarantee, if you are not not completely satisfied with your purchase, you can ask for a replacement or full refund.
DC97-14486A dryer heating element assembly replacement for Samsung works with the following models:
DV419AEU, DV419AEW, DV428AEL, DV428AEW, DV42H5000EW, DV42H5200EF, DV42H5200EP
DV42H5200EW, DV42H5400EF, DV42H5400EW, DV431AEP, DV431AEW, DV433ETGJWR
DV438AEL, DV438AER, DV448AEE, DV448AEP, DV448AEW, DV45H7000EP, DV45H7000EW
DV45H7200EW, DV45H7400EP, DV476ETHASU, DV476ETHAWR, DV484ETHASU, DV484ETHAWR
DV48H7400EW, DV501AEW, DV5451AEP, DV5451AEW, DV5471AEP, DV5471AEW, DVE50M7450W,
MDE6700AYW, MDE6700AZW, MDE9700AYW, MDE9700AZW, YIED7200TW, YNED7200TW
WTW7300XW1, WTW7300XW2, WTW7320YW0, WTW7340XW0, WTW7340XW1, WTW7340XW2,
WTW7600XW0, WTW7600XW1, WTW7600XW2, WTW7800XB0, WTW7800XB2, WTW7800XL0,
WTW7800XL2, WTW7800XL3, WTW7800XW0, WTW7800XW1, WTW7990XG1, WTW8800YC0,
WTW8240YW0, WTW7800XW2, WTW7800XW3, WTW6300SG1, WTW6300SW0, WTW6300SW1,
WTW6300WW0, WTW6340WW0, WTW6400SW0, WTW6400SW1, WTW6400SW2, WTW6400SW3,
WTW6500WW1, WTW6600SB0, WTW6600SB1, WTW6600SB2, WTW6600SB3, WTW6600SG0,
WTW6600SG1, WTW6600SG2, WTW6600SG3, WTW6600SW0, WTW6600SW1, WTW6600SW2,
WTW6600SW3, WTW6700TU1, WTW6700TU2, WTW6700TW0, WTW6700TW1, WTW6700TW2,
WTW6800WB1, WTW6800WL1, WTW6800WW1, 7MMVWB850WL0, MTW6300TQ1, MTW6500TQ0,
MTW6600TB0, MTW6600TQ0, MTW6600TQ1, MTW6700TQ0, MTW6700TQ1, MVWB300WQ0,
MVWB300WQ1, MVWB300WQ2, MVWB400VQ0, MVWB450WQ0, MVWB450WQ1, MVWB450WQ2,
MVWB455YQ0, MVWB700VQ0, MVWB750WB0, MVWB750WB1, MVWB750YW0, MVWB750WL1,
2. 4-piece dryer compatible with Samsung dryer Heater element (DC47-00019A) Thermal fuse (DC96-00887A and DC47-00016A) Thermostat (DC47-00018A) Thermal cut-off fuse and thermostat kit
- Replaceable model: DC47-00019A heating element can be used to replace the following digital components, such as 35001247, 35001119, AP4045884, 11855561, AH2038533, EA2038533, PS2038533, ERDC47-00019A
- Scope of application: 4 pieces of dryer substitutes are especially suitable for Samsung, Whirlpool, Sears, Kenmore, Kitchenaid and Roper dryers
- Your choice: The length of the heating wire is 25% longer than other common dryer replacement parts. The dryer heater replacement kit is made of high-quality materials (metal or stainless steel), tested and has a long service life. The quality you can trust !
- Note: These dryer replacement parts are compatible spare parts (non-original) and the brand names mentioned above and any associated model names are only used to demonstrate compatibility.
- After-sales guarantee: 100% refund guarantee – For whatever reason, you are not satisfied, you can request a replacement or a full refund, do not ask any questions. Happy customers give 4 sets of high rating, your purchase is no The risk brand. The brand team always provides a one-year warranty.
3. Dryer Repair Kit compatible with Samsung dryer Heater element (DC47-00019A), Thermal fuse (DC96-00887A and DC47-00016A), Thermostat (DC47-00018A), Thermistor (DC32-00007A)
- 【Replaceable model】DC47-00019A: replacement for numbers 35001247, 35001119, AP4045884, 1185561, AH2038533, EA2038533, PS2038533, ERDC47-00019A
- DC47-00016A: replacement for numbers AP4201894 and PS2038378
- DC47-00018A: replacement for numbers PS2038383, AP4201898 and 35001092
- DC96-00887A: replacement for numbers PS2038484 and AP4207819
- DC32-00007A: replacement for numbers PS4204984 and AP4201716
- 【Applicable ranges】The 5 pieces dryer replacements are especially compatible with Samsung, Sears, Kenmore, Kitchen-aid and Roper models dryer. If your home dryer is one of those brands, Don’t miss this product
- 【Package includes】 1 x DC47-00019A heater element, 1 x DC96-00887A thermal fuse, 1 x DC47-00016A thermal fuse and 1 x DC47-00018A thermostat , 1 x DC32-00007A thermistor, totally 5 pieces. Superior quality, Simple installation, you can solve the problem by yourself, Save time, energy and money. I believe it will bring you a surprise
- 【Note】These dryer replacement parts are compatible spare parts (non-original) and the brand names mentioned above and any associated model names are only used to demonstrate compatibility.
- 【After-sale guarantee】The product is made of metal or stainless steel, which can be applied for a long time.If there is any quality problem or unsatisfactory,You can ask for a replacement or full refund, no questions asked,Please feel free to place your order!
4. Dryer Heating Element for Samsung DC47-00019A & DC47-00018A DC96-00887A DC47-00016A Thermal Fuse Kit fits DV48H7400EW/A2 DV40J3000EW/A2 DV45H7000EW/A2 DV52J8700EP/A2 DV448AEP DV419AEW DV50F9A6EVW/A2
- ✅【Ideal Replacement】: Want new DC47-00019A Dryer Heater Element Thermal Fuse Cutoff Kit that matches the original, for far less than going back to the dealership? This dryer Heating Element was specifically designed to look and function the same as the original on your Dryer. While this is NOT a genuine Samsung & Kenmore part, it is a direct replacement and it will appear, fit and work like the factory part.
- ✅【Upgraded Dryer Heating Element】 – This dryer heater element is made from high-quality stainless steel. It also includes a two-pin connector that plugs directly into the appliance. The length of the heating coil is longer than other common dryer replacement parts and it increases the resistance.It has a longer service life. Replaces the component in your dryer. Helps to restore the functionality of a compatible machine when the electric dryer has stopped heating.
- ✅【Compatible】: Designed to fit specific Samsung & Kenmore manufactured electric dryer models. You can send us Dryer Models Number, we can help you to confirm if it can work or not.
- ✅【Replaces Numbers】: DC47-00019A Dryer heating element assembly replaces 35001247 35001119 AP4201899 2068550 AP4045884 1185561 AH2038533 EA2038533 PS2038533 ERDC47-00019A EAP2038533. the replacement parts is a direct replacement for your dryer.
- ✅【Buy with Confidence】: Money-back guarantee – Whatever the reason, you are not satisfied, you can request for replacement or full refund. do not ask any questions. If you have any problem about your order, please feel free to contact us.
The instructions work for most Samsung dryers, some may have some small differences. Here is how to replace the DC47-00019A heating element:
STEP1: Shut off the power to the dryer before working on it.
STEP2: Remove the two screws securing the top panel to the back of the dryer. Slide the top panel towards the back of the dryer to remove. You will need to remove the front control panel, some model have screws securing this. Remove them and pull up to remove, you should have enough extra wire to set the control panel on top of the dryer to get it out of the way. if not, then disconnect the wires and set it off to the side. Behind where the control panel was there will be four screws that secure the front panel of the dryer to the frame. Remove these four screws.
STEP3: Open the door of the dryer, there will be two screws that need to be removed at the bottom of the door frame area. With those two screws removed you should be able to tilt the front panel forward, remove the connector to the door switch, and remove the front panel.
STEP4: The heating element is located on the bottom right side of the dryer. To remove the element you will need to remove the wires to the heating element, thermal fuse, and thermostat. Then remove the mounting screw in the front and the whole heating element assembly should pull out the front of the dryer.
STEP5: Remove assembly and replace the DC47-00019A heating element. To re-install the heating element you will need to put everything back in the reverse order. To test the heating element, you will need an Ohm meter or multi-meter. A good heating element should read approximately 9-10 ohms. A burned out element will have an infinite resistance, it won’t register anything.
5. Samsung Dryer Heating Element DC47-00019A, Dryer Repair Kit with DC47-00018A Thermostat, DC47-00016A & DC96-00887A Thermal Fuses and DC32-00007A Dryer Thermistor
- HIGH QUALITY: The samsung dryer heating element is made of upgraded premium metal, stainless steel and plastic, the length of heating wire is 25% longer than other common dryer replacement parts, which can be applied for more time.
- MORE COMPATIBLE: The heating element for samsung dryer is especially for Samsung, Whirlpool, Sears, Kenmore, Kitchen-aid and Roper models dryer.
- 5PCS INCLUDE: 1 * DC47-00019A heater element, 1 * DC96-00887A thermal fuse, 1 * DC47-00016A thermal fuse and 1 * DC47-00018A thermostat, 1 * DC32-00007A thermistor.
- DC47-00019A HEATER ELEMENT: Replacing the parts of following numbers 35001247, 35001119, AP4045884, 1185561, AH2038533, EA2038533, PS2038533, ERDC47-00019A.
- GUARANTEE: Easy to replace by yourself according to relevant YouTube videos. You will get our worry-free 24-months warranty and friendly customer service.
6. Dryer Heating Element Exact fit for Samsung DV40J3000EW/A2-0000, Samsung DV448AEE/XAA-0000, Samsung DV209AEW/XAA-0001 Dryers by EnjoyShop777
- MODEL NUMBER: DC47-00019A Heating Element (Exact fit for Samsung DV40J3000EW/A2-0000, Samsung DV448AEE/XAA-0000, Samsung DV209AEW/XAA-0001 and other models)
- EASY TO INSTALL: It is made exactly fit for most top name brand dryers (Samsung, Kenmore)
- PREMIUM QUALITY: The replacement part is made from high quality material and well-tested by the manufacturer
- MONEY-BACK GUARANTEE: For any reason you’re not completely satisfied, you can ask for a replacement or full refund, no questions asked.
7. DC47-00019A Dryer Heating Element Replace for Samsung, DC96-00887A and DC47-00016A Thermal Fuse &Thermostat, DC47-00018A Thermal Cut-off fuse,Dryer Repair Kit Replacement
- PACKAGE INCLUDES: 1 x DC47-00019A heater element, 1 x DC96-00887A thermal fuse, 1 x DC47-00016A thermal fuse and 1 x DC47-00018A thermostat.
- HIGH QUALITY: The replacement parts are made by premium materials and thoroughly tested for long-lasting use.The length of the heating wire is 25% longer than other common dryer replacement parts,in this way, the heating effect will be excellent.
- APPLY SCOPE WIDE: The DC47 00019A dryer heating element are especially compatible with Samsung, Sears, Kenmore, Kitchen-aid and Roper models dryer.
- REPLACEABLE MODEL: DC47-00019A replacement for numbers 35001247, 35001119, AP4045884, 1185561, AH2038533, EA2038533, PS2038533
- DC47-00016A replacement for numbers AP4201894 and PS2038378
- DC47-00018A replacement for numbers PS2038383, AP4201898 and 35001092
- DC96-00887A replacement for numbers PS2038484 and AP4207819.
- 100% MONEY BACK GUARANTEE: For whatever reason, within a year，you are not satisfied, you can request a replacement or a full refund.We have no objections.We have a complete after-sales team to solve problems.If you have any questions about the product, feel free to ask and we will answer them.
8. Supplying Demand DC97-14486A Clothes Dryer Heating Element Compatible W/Samsung
DC97-14486A Complete Heater Element Assembly. Includes heater casing, heater element, thermostat, and high limit. * The hi-limit which is included has been removed and placed in a protected bag for shipping protections against damages. The hi-limit will need to be reattached once you receive the package. The reason for this has been bent spades and damages of the hi-limit from past shipments. *This is not a Whirlpool and/or a Samsung OEM product. The Whirlpool and/or a Samsung brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool and/or a Samsung brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”
9. Rightex Dryer Heating Element DC47-00019A for Samsung Dryer – Thermal Fuse DC96-00887A and DC47-00016A – Dryer Thermistor DC32-00007A – Thermostat DC47-00018A – Dryer Repair Kit Replacement Parts
- ???? ONE YEAR WARRANTY.
- BEST DRYER HEATING ELEMENT REPAIR KIT – Don’t get frustrated with cheap spare parts that give up on you – fixing your broken dryer just got simpler with our new heating element kit for Samsung which is easy to install, fits perfectly, saves money, time, and doesn’t get your hands too dirty.
- ALL-IN-ONE DRYER REPLACEMENT SET – The heating element set comes with the following parts: DC47-00019A heater element, DC96-00887A dryer thermal fuse, DC47-00016A thermal fuse, DC47-00018A dryer thermostat and DC32-00007A thermistor to solve any type of heating malfunction.
- PREMIUM-QUALITY – Made from high-grade stainless steel and metal, the electric heating element has a longer heating wire than other common dryer replacement parts that increase the resistance by 25%, giving it a longer service life and is also thoroughly tested by the manufacturer.
- COMPATIBLE & EASY INSTALLATION – The dryer replacement parts kit is for use with a range of brands such as Samsung, Maytag, Sears, Kenmore, Whirlpool, Kitchenaid and Ropers dryer models – replacement dryer parts are for use with specific models only. Easy to install by yourself, YouTube videos offer a handy guide for your DIY need. Please check your model number before purchase.
- GUARANTEE – Company names are used only for indicating compatibility and we do not represent these companies. Get risk free purchase with our ONE YEAR WARRANTY – We offer you a FULL replacement, if needed, with no questions asked, along with very friendly customer service.
By our suggestions above, we hope that you can found Dv48h7400ewa2 Heating for you.Please don’t forget to share your experience by comment in this post. Thank you!