Nowadays, there are so many products of brass misting nozzles for cooling system in the market and you are wondering to choose a best one.You have searched for brass misting nozzles for cooling system in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings brass misting nozzles for cooling system which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
966 reviews analysed
1. KUWAN 20pcs Brass Misting Nozzles for Cooling System 0.012" (0.3 mm) 10/24 UNC Garden
Feature
- Brass / SS 0.012 inches (0.3 mm) orifice, screw Into any 10/24-threaded mist nozzle opening
- High Quality: made of brass, never rust. best choice for outdoor use with cold water
- Operation Pressure: 20-70kg/cm, flow Rate: 80-145ml/min
- Minimal water use of 1/2 gallon of water per hour per mist nozzle
- Leak-proof, self-sealing o-ring included with each brass nozzle
- no tape or sealant is required
2. Sywon 40 Pack Brass Misting Nozzles Replacement Heads for Garden Patio Lawn Landscaping Dust Control and Outdoor Cooling Mister System, 10/24 UNC
Feature
- HIGH EFFICIENCY: Operation Pressure:20-70kg/cm. Flow Rate:80-145ml/min
- DURABLE MATERIAL: Made of brass with good quality
- Rust-free and durable. High cost performance: 38pcs+2pcs (Extra Spare) =40pcs
- 0.012” DIA. ORIFICE: The orifice of these misting nozzles is 0.012 inch/0.3 mm in diameter, which fits for low pressure mister system
- EASY TO INSTALL: Easily screw into any 10/ 24 UNC threaded mist nozzle opening
- WIDE USAGE: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, etc.
3. LOOYUAN 20pcs Brass Misting Nozzles for Outdoor Cooling System 0.012" Orifice (0.3 mm) 10/24 UNC Garden
Feature
- High Quality: Made of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water.
- Brass / SS 0.012 inches (0.3 mm) orifice, screw Into any 10/24-threaded mist nozzle opening
- Operation Pressure:20-70kg/Cm. Flow Rate:80-145ml/Min.
- Minimal Water Use Of 1/2 Gallon Of Water Per Hour Per Nozzle.
- Leak-proof, self-sealing o-ring included with each brass nozzle
- no tape or sealant is required
4. KUWAN 0.016" Orifice (0.4mm) Thread UNC 10/24 Brass Misting Nozzles Low Pressure Atomizing Misting Sprayer Water Hose Nozzle for Greenhouse, Landscaping, Outdoor Cooling Mister System (40PCS)
Feature
- MATERIAL: The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water
- DIMENSION: Thread size is UNC 10-24
- Orifice diameter is 0.4mm
- PACKAGE: 40PCS Brass Misting Nozzles For Outdoor Cooling System
- WIDE USAGE: The misting nozzles is widely applied to outdoor cooling system, agriculture irrigation system, green house, spray disinfection, epidemic prevention, deodorizing air purification, landscaping, small fountain, etc
- EASY TO INSTALL: The brass misting nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening
Description
Description:
The misting nozzle is made of a sturdy brass with stainless steel orifice.
Widely applied for garden, patio, greenhouses, spraying disinfectant, dust
removal, landscaping, lawn misting systems, artificial fog and other
humidification place. The misting nozzle can use liquid pressure to form a
very fine mist, excellent misting effect, energy and water saving, low
cost, good effect, no leakage
Feature:
The misting performance is excellent. This type of nozzle is applied in
the low pressure for-making
Leak-proof, durable; Excellent mist effectively strengthen humidification
effect, perfect for misting application
Create fine mist droplets that flash evaporate and cool the air almost
instantly
The brass nozzle heads can be easily screwed into any 10/24 UNC threaded mist
nozzle opening
5. Landgarden Outdoor Misting Cooling System,49FT Misting Line,15 Brass Mist Nozzles for Patio Garden Greenhouse
Feature
- 【Upgrade Quality】: Updated mist system nozzle are made of precision brass, Easy connect,leak-proof and self-sealing Tee Joint ,high quality UV treated flexible tubing, resistant to yellowing hydrolysis and microbial degradation,and meanwhile UV up to 3.5 or more.
- 【Wide Application】: Misting Cooling System widely apply for garden, landscaping, greenhouse, humidification, outdoor cooling system, deodorant air purification, swimming pool misting fog cooling, mist mosquito system and so on
- 【Easy to DIY install】: Providing you all the accessories you need for a air cooling and plant misting system,only need 10 minutes to Installs as your idea, delivers very fine mist to significantly cool the air in the hottest summer weather
- 【Saving Energy and Water】: Misting cooling system directly use tap water to spray and cool down, no electricity consumption.Compare with manual watering on irrigation you can save 70% of water.Comparing with air humidification machine it works faster and more efficient
- 【Creating a Natural Cooling Area 】: The fantastic outdoor cooling system provides a natural water cooling area,release you from the indoor bad air conditions and enjoy the fantastic outdoor sight in hot summer, surrounding air temperatures up to 20 degrees.
Description
Landgarden focus on the garden products developing and selling,providing
the new and qualified products.We are devoted to build a one-stop garden
accessories shop,thanks for reviewing our products.Pls e-mail us
if you have any question.
Advantage：
①Fine Brass misting nozzle
②Easy connect and Leak-proof T Joint
③Proper hardness misting line(ensure tight bond with T Joint)
④Special T Joint could be used to transform ordinary fan to misting fan
⑤All accessories include
Package included:
1x15M Misting line
1×3/4″ PVC faucet connector
1×1/2″ PVC socket
15xBrass mist nozzles(Including 1 spare nozzles)
15XEasy Connect Tee Joint（Including 1 Tee Joint）
1XTee Joint for misting fan transform 2XEnd Cap
15XCable tie
15X”U” Clip
15XSpring Clip
6. H&G lifestyles Brass Misting Nozzles for Outdoor Cooling System Mist Nozzle Cleaner Kit 10/24 UNC 20 PCS
Feature
- ★High Cost Performance: 20 Pcs Brass Nozzles + A Bottle of Misting head Cleaner 8 OZ
- ★High Quality: Made of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water. mister parts for orbit Landgarden misting system
- ★ Safe And Non-Toxic: The Nozzle cleaner is made of food grade materials,Gently soaks mineral deposits away, Routine use for nozzle maintenance extends nozzle life
- ★ EASY TO INSTALL: Easily screw into any 10/ 24 UNC threaded mist nozzle opening, Minimal Water Use Of 1/2 Gallon Of Water Per Hour Per Nozzle.
- ★ WIDE USAGE: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, etc.
Description
From The Manufacturer
This misting nozzle are built-in stainless steel wafer through advanced forging process, strong durability, is 2.5 times the life of similar nozzle.
Nozzle can fully spray use the pressure of tap water. saving more than 10 times cost compared with the humidifier. TIPS:
★ soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
★ Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required.
★ A Filter on your mist system is highly recommended.
Included In The Package:
20 x Brass Misting Nozzles
1X 8-ounce misting nozzle cleaner
7. AmMist 23pcs/pack Mister Nozzle Stainless Steel Fog Nozzles 0.30mm (0.012inch) Orifice 10/24 unc Thread For Garden, Humidification, Outdoor Cooling, Dust Control, Landscaping
Feature
- ★【 MULTI-USAGE 】: humidification, outdoor cooling, landscaping, greenhouse, etc.
- ★【 DURABILITY 】: Complete 303 Stainless Steel Nozzle / Raw materials are purchased from Japan with high purity.
- ★【 STABLE QUALITY 】: Taking a 100% inspection of all the nozzles before shipment
- ★【 RELIABILITY 】: The factory focuses in nozzle engineering and manufacturing for more than 30 years.
- ★【 PERFORMANCE 】: Operation Pressure: 100~1,000psi (6.9bar~70bar) / Flow Rate: 35~113ml/min
Description
※ FEATURES:
1. Uni-body stainless steel design offers the best durability.
2. The nozzle creates fine mist with lower cost comparing to the humidifier.
3. It’s with standard 10/24 unc thread and equipped viton o-ring.
4. The nozzle orifice is 0.30mm that can be recognized by laser mark.
5. The material is 303 Stainless Steel.
6. 60-70 Degree Cone Pattern Spray
※ REMINDER :
1. Nozzles are WITHOUT filters.
Using properly filtered water helps extend lifespan.
2. Nozzles are WITHOUT anti-drips.
Applying solenoid valves helps drain efficiently.
Your Positive Feedback Gives Us Strength!
※ PACKAGE:
23 pieces nozzles
8. Bluecell World BCP 10PCS 10/24 Screw Thread Brass Misting Nozzle Plug for Outdoor Cooling System
Feature
- Pack of 10, 10/24 UNC-Thread, brass misting nozzle plug
- Made of brass, anti-rust and anti-corrosion, M5 screw.
- Energy and water saving: Easy to install, install the plug when you needn’t use misting nozzle
- Great for garden watering, greenhouse nursery, greenhouse humidification and cooling down, etc.
- Suitable for low pressure spray system.
9. Yotako Misting Nozzles Kit 12x Brass Mister Nozzles 0.3mm 10/24 UNC+ 10x 1/4” Slip-Lok Misting Nozzle Tees+ 1x Plug, Fog Nozzles for Patio Misting System Outdoor Cooling System Garden Water Mister
Feature
- 【Renew Misting Set up】– Operation Pressure: 20-70kg/Cm, Flow Rate: 80-145ml/Min, Working pressure: 30- 450PSI, Best clogged mister nozzles replacement for DIY homemade low pressure greenhouse, umbrella, patio mister systems, outdoor misting misters cooling system,drip irrigation kit
- 【Mister Nozzles】– 10/24 UNC thread, 0.012” (0.3 mm) orifice, stainless steel brass body, self-sealing o-ring included, leak-proof no tape or sealant is required
- 【Misting Nozzle Tees】– Slip lock quick pushing, fit for 1/4” misting systems,great used for water cooling,it can delivers very fine mist to significantly cool the air in the hottest summer weather
- 【Maintain Fog Nozzles】– Hard water, lime and calcium may clog the fogger nozzles, Clean nozzles periodically by soaking them in vinegar & warm water solution, Replace sediment filters (not included), Remove them at the end of the season
- 【Package】– 10 x Slip-Lok Misting Nozzle Tees, 12 x Nozzles, 1 x End Plug,those misting cooling system directly use tap water to spray and cool down, no electricity,and can save 70% of water when compare with manual watering on irrigation you
10. uxcell Brass Misting Nozzle – 10/24 UNC 0.2mm Orifice Dia Replacement Heads for Outdoor Cooling System – 5 Pcs
Feature
- [MATERIAL] – Made of brass with stainless steel orifice, anti-rust and durable.
- [EASY TO INSTALL] – Easily screw into any 10/ 24 UNC threaded mist nozzle opening.
- [LEAK-PROOF] – Self-sealing o-ring included with each nozzle, no tape or sealant is required.
- [TECHNICAL PARAMETERS] – 0.008″ (0.2mm) orifice diameter, 15-70kg working pressure, 50-90ml/min flow rate.
- [WIDELY USED] – Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, etc.
Description
This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage.
It is used a sturdy brass body with stainless steel orifice, widely used in dust removal, landscaping, cool down, artificial fog and other humidification place.
The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required.
This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging.
Specification:
Material: Brass, Stainless steel
Thread size: UNC 10-24
Orifice Diameter: 0.2mm / 0.008″
Pressure: 15-70 kg/cm
Flow Rate: 50-90 ml/min
Total Size: 9.5mm x 9mm / 0.37″ x 0.35″ (Max.D*H)
Package Content:
5 x Misting Nozzles
Conclusion
By our suggestions above, we hope that you can found Brass Misting Nozzles For Cooling System for you.Please don’t forget to share your experience by comment in this post. Thank you!
