884 reviews analysed
1. 35ft Beam Compatible Electric Hose Corded
- Light-weight Crush-proof Electric Hose. Color may vary: light grey or dark grey
- Willl only fit standard 1.5 inch inside diameter wall inlet valve
- It will only work with current, two prong powerhead plug. Please ask to ensure compatibility.
- Current version of upper wand maybe required for your Powerhead.
2. Cen-Tec Systems 92927 Central Vacuum Power Nozzle Kit
- Central vacuum package includes a power nozzle, integrated electric telescopic wand, and 35 foot total control electric hose allowing you to control both the vacuum and the nozzle from the hose handle
- The 14Wide power nozzle has a chevron agitator design shown to provide superior cleaning performance
- Compatible with all major brands of central vacuums including beam, Electrolux, eureka, vacumaid, vacuflo, nutone, cyclovac, canavac, husky, star power, md, and imperium
- 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle
- Premium American made dusting tool, upholstery tool, and crevice tool can be caddied on the wand using the provided tool clip letting you take them along for faster cleaning
The Cen-Tec 92927 central vacuum accessory package is designed to provide superior cleaning for today’s home with both carpeted and hard floor surfaces. The power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery, excellent Grooming of the carpeted surface, and superior edge cleaning. The life time reinforced poly-V belt will provide years of reliable service without the need to routinely Replace the Drive belt. The 35 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers most often request a hose Sock to protect the investment in their home and furnishing and we have recognized this by pre-installing a premium Sock treated with an anti-microbial to protect you and your home environment. The universal hose end makes the 92927 compatible with all major brands of central vacuums including beam, ELECTROLUX, eureka, VacuMaid, Vacuflo, Nutone, Cyclovac, Canavac, husky, star power, Md, and imperium brands. The 14 inch wide power nozzle has a chevron agitator design shown to provide superior cleaning performance. The quiet Drive poly-V Drive system reduces vibration and noise while providing consistent power from the motor to the carpet agitator. The quiet Drive belt is set away from the edge of the nozzle to allow for brushed edge cleaning to both sides of the nozzle. A soft Bumper protects furnishing. A quick release wand system allows you to draw the wand for detail cleaning and quickly return to operation of the power nozzle. The nozzle is connected to the hose through a fully integrated telescopic electric wand.
3. Ultra Clean 30′ Hose Kit with Beam Central Vacuum Electric Powerhead Sweep N Groom Rugmaster
- Central Vacuum Electric Carpet Powerhead Sweep n Groom: Pigtail style power cord, All steel chromed beater bar, On / Off foot pedal switch
- Ultra Clean 30 foot Deluxe 3-Way Switch Electric Hose, color of the hose may vary: silver or light grey according to availability and at Seller’s discretion. “Pigtail” or “Direct Connect” configuration available.
- PLEASE SPECIFY HOSE CONFIGURATION UPON PURCHASE by sending a message to Seller. If no hose configuration is specified, “Pigtail” will be sent as this is the most common for the majority of the households
- Set of cord management wand and a MUST HAVE microfiber dusting cloth.
- All Brand New in a Box – For technical support before purchase, call: 929.800.2980
4. 30′ Deluxe Central Vacuum Accessory kit
- 30′ Plastiflex 3-way switch, Crush proof Hose (Direct plug adaptor included)
- Sweep and Groom power head with metal brush roll
- 2 sets of wand (including a telescopic wand)
- all premium tools and floor brush w/natural bristols
- Fits all central vacuums, Beam, Eureka, Electrolux, MD, Vacu maid, Cyclo vac and etc
This is the most popular central vacuum attachment kit on the market. The 3-way switch control allows you to turn on/off the unit and the power head. 2 sets of wands helps for quick replacement of tools and attachments. all tools are none marking and have natural bristols. The hose has a power cord attached from a manufacturer and it includes the Direct connect plug and instructions on how to change it.
5. Broan-NuTone CH235 Crush-Proof Central Vacuum Hose with Swivel Handle, 30-Feet
- HIGH-QUALITY HOSE: Crush-proof, low-voltage vacuum hose springs back to its original shape after use for easy storage
- DURABLE: Vinyl reinforced construction with a dark gray finish provides long lasting use
- EASY TO USE: Features an on/off switch to simplify controls – making it easy for everyone to use!
- UNIVERSAL: Includes patent-pending universal hose end which fits all Broan-NuTone vacuums and most other standard inlets for your convenience
- IDEAL SIZE: Vacuum hose measures 30-feet in length and has a 1.38″ inner hose diameter to make cleaning easy!
Enhance your vacuum with Broan-NuTone’s Crush-Proof Central Vacuum Hose! This low-voltage hose springs back to its original shape after every use. The durable vinyl reinforced construction has a dark gray finish to ensure long-lasting use. The crush-proof vacuum hose features an on/off switch for easy use. It includes a patent-pending universal hose end which fits all Broan-NuTone central vacuums and most other standard inlets. This hose is 30-feet in length and has a 1.38″ inner hose diameter. Keep your house spotless with Broan-NuTone’s Crush-Proof Central Vacuum Hose!
6. Cen-Tec Systems 90298 Central Vacuum Direct Connect Electric Hose, 30′
- Includes a soft-grip handle with a great ergonomic feel
- Includes an installed 30 foot knit hose sock
- which protects furnishings from scratches from the hose
- The hose has a direct connect end, combining the high voltage pin jack in conjunction with the low voltage contacts, permitting control of both the vacuum unit and the electric power nozzle
- Compatible with all major brands of central vacuums with these inlets including Beam, Electrolux, Eureka, Nutone, VacuMaid, Vacuflo, Husky, Canavac, Cyclovac, MD and Imperium
- Current version of upper wand maybe required for your Powerhead.
The 90298 is an individually packed 30 Ft. (9M) electric hose with direct connect wall end and chrome locking stub tube. The hose is often known as a XZ9231 and features soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. This central vacuum hose connects to the wall via a “direct connect” connection. There is a high quality 30 foot knit hose sock installed on the vacuum hose. The hose is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, M+S, MD, Imperium, and most regional brands. The 30 foot hose has a direct connect end, combining the high voltage pin Jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle.
7. Cen-Tec Systems 99713 Central Vacuum 35 Foot Universal Connect Low Voltage Hose with Hose Sock and Button Lock Stub Tube
- Universal hose end insures compatibility
- 35 Feet of hose length, helping you be able to reach in every hard-to-get-to corner of the room
- Compatible with major brands of central vac, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
- Includes a soft-grip handle with a great ergonomic feel
- Includes an installed 35 foot knit hose sock, which protects furnishings from scratches from the hose
The 99713 is designed to provide superior airflow in a lightweight design to address the two features most desired in a central vacuum on/off control hose. The 360 degree swivel handle is designed to reduce kinking, stress on the hose, and stress on you as the user by relaxing any tension in the hose as you move through the room. The 35 foot length provides extra reach and insure there is sufficient length to prevent tugging and pulling to reach to the corner of the room. The installed hose sock is designed to reduce the possibility of marking walls, floor, or furnishings while also avoiding wear to doorframes and chair legs. The hose is compatible with industry standard central vacuum inlets including Nutone branded valves equipped with low voltage contacts in the opening of the inlet valve. You can confirm suitability by putting your finger into the hose opening and confirming there are two low voltage contacts on the upper surface of the opening. No need for concern as these contacts are low volt and will not harm you in any fashion. The 99713 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, M+S, MD, Imperium, and most regional brands.
8. Cen-Tec Systems Central Vacuum Electric Powerhead Kit, Pigtail Hose, Black
- Suitable for use with all major brands of central vacuum including beam, electrolux, eureka, vacumaid, vacuflo, md, cyclovac, canavac, nutone, m & s, and imperium
- Features the CT16QD central vacuum power nozzle, which is 14” wide with a chevron agitator that is shown to improve deep cleaning by drawing debris and embedded dirt to the center of the nozzle where it is drawn away by the power of the vacuum
- The wood agitator is driven by Cen-Tec’s trade mark Quiet Drive poly V belt that reduces vibration and noise
- The long life reinforced belt engages the agitator away from the edge of the brush providing for brushless edge cleaning to both sides of the nozzle. This design insures superior edge cleaning and the four position height adjustment provides excellent grooming of the carpet surface helping to preserving the carpets appearance without damaging the carpet fibers
- Includes a fully integrated telescopic electric wand, which connects the CT16QD to the 30 foot universal total control hose
- Includes a 1.375” by 30 foot four wire hose, permitting you to control the vacuum and power nozzle from the 360 degree swivel gas pump handle
- The hose is designed to fit all industry standard inlet valves and the 8 foot extension cord insures it can reach standard high volt inlets to support the power requirement of the CT16QD electric nozzle
- Premium accessories compliment the power nozzle system including a 12” hard floor brush with natural fill, premium dusting tool, upholstery, tool, crevice, tool caddy and a second chrome telescopic wand for the floor brush so the integrated electric wand can remain with the power nozzle
- The hose and handle are manufactured in the united states, offering years of trouble free service
The CT16QD is a premium featured electric carpet brush ideal for every home and all carpet types. The computer balanced agitator runs on smooth bearing for extended life and is visible through the view window to confirm its operation when engaged. The reinforced long life poly-v belt eliminates vibration and noise and is further protected by a reset that engages should the agitator become locked during operation. Simply clear the object which prevents the agitator from spinning and hit the reset button to return to cleaning. The CT16QD delivers on the three most requested features in a brush. Excellent embedded dirt collection protecting your carpet, excellent surface grooming maintaining carpet appearance, and superior edge cleaning. The premium integrated telescopic electric wand is designed for use with the quick release feature of the CT16QD and mates to the electric hose. The hose end is designed to fit industry standard inlet valves, including the Nutone inlet. The 12” hard floor brush has a natural fill to protect wood floors and accessories for above the floor cleaning. The 93411 is suitable for use with all major brands of central vacuum including Beam, Electrolux, Eureka, Vacumaid, Vacuflo, MD, Cyclovac, Canavac, Nutone, M&S, and Imperium.
9. Cen-Tec Systems 94907 Central Vacuum Low Voltage Kit, 50 Ft. Hose, Light Gray
- Includes a 1-3/8” x 50 foot pearl gray low volt hose providing on off control of the central vacuum from the 360 degree swivel handle
- The hose is a soft crown, lightweight crushproof construction that resists kinking and won’t mark furnishings or floors. The wall end is designed to be compatible with industry standard wall inlets with split low voltage contacts
- Compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Hoover, Cyclovac, Vacuflo, Vacumaid, md, m&s, Husky, Canvac, Honeywell, Nutone, and well as most regional brands
- The premium chrome telescopic wand features cen-tec’s trademarked button down to make it easy to release the wand from the hose handle for use of the premium accessories
- Features a 12” hard floor brush with natural fill to protect hardwood, tile, marble, stones, and vinyl flooring from marks or scratching
- The hose and most of the accessories are manufactured in the USA
- The 10. 5” automatic combination nozzle is ideal for carpets and area rugs and can pass across different floor surfaces without the need to make adjustments to the tool
Cen-Tec’s 94907 is designed to provide the cleaning accessories most often requested in a low voltage central vacuum hard floor and general-purpose attachment set. A 50 Ft. hose with an inner diameter of 1-3/8” ensures superior airflow and improved cleaning performance that also assists the performance of air turbine tools often used with low voltage hoses. Further, the hose allows for switch control to turn the central vacuum on and off at the handle. A 12” natural fill floor brush and fully automatic combination nozzle address hard surfaces, area rugs, and even carpeted surfaces. A premium chrome ratchet telescopic wand with the easy release button down feature and a full set of premium above the floor accessories address upholstery, stairs, table tops, crevices, and baseboards. The tool caddy clip lets them travel with you while you clean. The 94907 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Hoover, Cyclovac, Vacuflo, Vacumaid, MD, M&S, Husky, Canavac, Honeywell, and well as most regional brands.
10. 35′ "Comet" Central Vacuum Kit with Hose, Power Head & Tools – Works with All Brands of Central Vacuum Units
- Light gray 35ft 1 3/8″ inside diameter electric crushproof hose (27% more airflow than 1 1/4″ inside diameter hose) with a 3-way switch and a soft grip ergonomic handle.
- Light gray colored “Comet” power head.
- Comes complete with a 4 piece tool kit (12″ Floor brush, crevice tool, upholstery tool and duster), telescopic wand for use with floor brush, red dust mop, caddy bag, wand tool caddy attachment, hose hanger and wall holder
- Compatible with any standard 1.5 inch inside diameter wall inlet valves. Please measure your inlet valve to ensure compatibility. Your choice of either a pigtail or direct connect hose configuration. Please notify us of your choice after purchase.
- Not compatible with the Vacuflo proprietary inlet valve (HP Vacuflo Series 4940, 4949, 4940, 4941) . If you are unsure of compatibility, please message Alder Products Ltd.
Electric Hose – Compatible with any 1.5″ wall inlet valve – 1 3/8″ inside diameter crush-proof lightweight hose with button lock handle with a 3-way control switch – 360 degree swivel handle – New handle design with a soft grip – Strain relief helps maintain consistent suction by preventing kinks in the hose at the handleElectric Power Head – Durable drive/geared belt – Electronic reset button to protect motor; motor will instantly stop if the brush roller is jammed – Headlight for improved viewing angle – Sealed ball bearings for no hair build-up Brush roller viewing window – On/Off foot pedal switch button – Non-marking wheels – Great edge cleaning – Protective bumper to protect baseboards and furniture – 13 inch cleaning path Tools/Accessories – Mesh attachment caddy bag – Steel ratchet wand – Set of cord management button lock wands with cord clips – 4 piece tool kit (12″ Floor brush, crevice tool, upholstery tools and duster) – Wand tool caddy attachment – Hose hanger – Wand holder – Red dust mop
By our suggestions above, we hope that you can found Bean Central Vacuum Hose for you.Please don’t forget to share your experience by comment in this post. Thank you!